Ruby nozzle RED-X 0.4 and 0.6 mm

Description

RED-X is an upgrade for FDM 3D printers (1.75 mm filament)! Made in Germany!

RED-X uses a synthetic ruby with a hardness of 9.0 Mohs. This hardness provides extremely high wear resistance. It ensures that virtually all printing materials can be processed over a long period of time without any loss of quality.

RED-X withstands all common materials up to a printing temperature of 450 °C. Even highly abrasive materials such as nylon, carbon fiber and even boron nitride (cBN) cannot harm RED-X.

Compatibility list:

ATTENTION!!!: Always use protective gloves when mounting/removing the nozzle to prevent burns.

Required tools: torque wrench with 7 mm hex socket, 16 mm wrench or adjustable wrench to hold the hotend in place, protective gloves

Remove the old nozzle from your printer. To do this, heat the printer to at least 240°C and loosen the nozzle with a suitable tool. Use the size 16 wrench to counter-hold on the heat block. Let the hotend cool down again and remove the nozzle completely. Screw in RED-X by hand and heat the hotend again. Once the temperature is reached, set a torque wrench to 1 -1.5 Nm and tighten RED-X with it.

Please observe the printer-specific information.

Note:

1. Do not drop the nozzle and avoid pressure and impact on the nozzle!
2. The working temperature of the nozzle must not exceed 550°C.
3. Avoid contamination of the nozzle caused by excessive temperatures or by oversized high-temperature-resistant particles in special filaments.
4. Make sure the filament has reached its glass transition temperature in the hotend before starting the extrusion process.

Statutory warranty

The statutory rights in respect of defects apply. For consumers the limitation period is two years from delivery of the goods; for business customers, section 9 of our Terms and Conditions.